Home About Us Contact Us Sales Inquiry Technical Inquiry E-mail Site
Custom Built Hydraulic Power Units, Lancaster PA  
 
Found 4 item(s).

  TB Series
This light to medium duty motor incorporates all the features of heavy duty motors. Design features include a high pressure shaft seal so external drains are never required, roller vane technology for automatic wear compensation, and full flow internal cooling and flushing. This is a very economical motor for most light to medium duty applications.
SPECIFICATIONS:
  • 14 Displacements 45...390 cm3/rev (2.5-24.0 in3/rev)
  • Max Continuous Pressure - 125 bar (to 1800 psi)
  • Max Intermittent Pressure - 165 bar (to 2400 psi)
  • Max Oil Flow - 57 lpm (to 15 gpm)
  • Max Speed - 785 rpm
  • Max Continuous Torque - 440 Nm (3897 lb in)
  • Max Intermittent Torque - 540 Nm (4783 lb in)
  • Max Side Load - 4900 N (to 1100 lb)

  •   TC Series
    High Performance and long life in a reduced space envelope describe Parker's TC Series motors. High volume fluid flow continually washes across splines and seals to extend their life. Roller vanes and sealed commutation assure high volumetric efficiency and smooth low speed operation.
    SPECIFICATIONS:
  • 14 Displacements 45...390 cm3/rev (2.5-24.0 in3/rev)
  • Max Continuous Pressure - 86 bar (to 1250 psi)
  • Max Intermittent Pressure - 121 bar (to 1750 psi)
  • Max Oil Flow - 57 lpm (to 15 gpm)
  • Max Speed - 810 rpm
  • Max Continuous Torque - 164.4 Nm (1455 lb in)
  • Max Intermittent Torque - 243.4 Nm (2154 lb in)
  • Max Side Load - 3505 N (to 788 lb)

  •   TE Series
    This medium duty motor has higher pressure ratings than the TB motor, for applications requiring higher torque. Robust roller bearings withstand higher side loads and are suitable for chain and sprocket shaft connections. It uses high pressure shaft seals, robust roller bearings and high flow shaft seal cooling.
    SPECIFICATIONS:
  • 14 Displacements 45...390 cm3/rev (2.5-24.0 in3/rev)
  • Max Continuous Pressure - 140 bar (to 2030 psi)
  • Max Intermittent Pressure - 190 bar (to 2750 psi)
  • Max Oil Flow - 75 lpm (to 20 gpm)
  • Max Speed - 1000 rpm
  • Max Continuous Torque - 467 Nm (4139 lb in)
  • Max Intermittent Torque - 648 Nm (5728 lb in)
  • Max Side Load - 6650 N (to 1500 lb)

  •   TF Series
    Sturdy construction throughout makes Parker's TF Series motors suitable for the most severe applications. The powertrain uses patented 60:40 spline geometry for strength. All splines are constantly flushed with cool fluid for durability. Roller vanes and sealed commutation assure high volumetric efficiency, smooth low speed operation and extended life. Shaft seals can withstand full system pressure and are washed in cool fluid for long life.
    SPECIFICATIONS:
  • 11 Displacements 81...477 cm3/rev (4.9-29.1 in3/rev)
  • Max Continuous Pressure - 210 bar (to 3000 psi)
  • Max Intermittent Pressure - 281 bar (to 4000 psi)
  • Max Oil Flow - 95 lpm (to 25 gpm)
  • Max Speed - 749 rpm
  • Max Continuous Torque - 681 Nm (6027 lb in)
  • Max Intermittent Torque - 916 Nm (8106 lb in)
  • Max Side Load - 16000 N (to 3597 lb)

  •  

    Home | About Us | Contact Us | Privacy | Terms of Use | FAQs | Guarantee | E-mail Friend | Articles
     
    Copyright © 2018 Lanco Hydraulic Services, Inc.. All Rights Reserved.
    Custom Built Hydraulic Power Units, Lancaster PA
    Developed by 2simplifiTM Web Solutions, Inc.